Product Description
Concrete penetrating sealer polishing system is for the old epoxy flooring which is damaged, delaminated and shelled, scratched and abraded, etc. and cannot meet the requirements of daily use.
Through mechanical grinding to remove the restoration of the previous base surface containing cement components, infiltration of concrete sealer agent and the base surface of the cement components contained in the semi-chemical cement, free calcium,
Silicon oxide material through a series of chemical reaction, so as to get a dust-free, happy dense, high resistance and steel hardness of the base surface; through special machinery for different degrees of phase plugging, fine checking, and
Through a series of process construction such as phase plugging, fine checking, fine plugging and bundling of light by special machinery, a beautiful, dust-free, dense, highly wear-resistant and marble-like luster base surface is obtained.
Scope of application
Widely used in old epoxy flooring needs renovation treatment of industrial plants, logistics warehouses, supermarkets, underground car parks, office laboratories and other places of the cement base floor.
Product performance
- Beautiful and dustproof, hard and wear-resistant.
- Anti-pressure and anti-seepage, long-lasting lustre.
- Energy saving and environmental protection, simple maintenance.
- Normal service life is more than 20 years.
Construction process
Remove the old epoxy with a professional grinder to mechanically polish the old epoxy layer as well as the badly damaged surface layer of the floor until it is restored to the previous cement base floor; then clean, sweep and wash the ground.
The material will be hardened by "Diheng" penetration type concrete sealing curing agent immersed in the construction area ground, and keep the ground wet soaking time of about 5 minutes, to be dry 12 hours.
After 12 hours of solid drying, the overall strength of the concrete floor can be significantly improved.
Rough grinding Through professional grinding machinery with different levels of coarse resin abrasive pads on the ground in order to carry out the overall grinding process step by step, and at the same time clean up the ground with water or with a large vacuum cleaner to remove sewage slurry.
At the same time, clean up the ground with water or use large hoover to remove the sewage slurry on the ground.
Under the material crystallisation "Diheng" penetration type concrete sealing curing agent immersed to the construction area ground, and keep the ground wet soaking time of about 1 hour, when the surface becomes viscous when the surface with water to clean the surface; dry 12 hours, according to the strength of the different concrete ground conditions, can be repeated a number of times the immersion material process, until the overall strength of the concrete ground in line with the polished.
After 12 hours of solid drying, according to different strength condition of concrete floor, the soaking material process can be repeated several times until the overall strength of concrete floor meets the polishing requirements.
Fine grinding Through the professional grinding machinery with different levels of coarse resin grinding pads on the ground in order to carry out the overall grinding process step by step, and at the same time, clean up with water or use large-scale vacuum cleaner to remove sewage slurry on the ground.
At the same time, clean up with water or use large hoover to remove the sewage slurry on the ground.
Polishing After the overall high-speed polishing of the floor by professional polishing machinery with polishing pads, a concrete floor with marble-like luster can be formed.
10 advantages of concrete penetration sealing the curing agent
Hard and wear-resistant Breathing function avoids the disadvantages of concrete
Reacts with substances in concrete to form a hard substance. Although it can prevent most of the babying and liquid impurities into the
It can block the structural pores of the concrete and greatly improve the concrete's entry into the concrete, but at the same time, it allows the water of gas to freely enter the concrete.
Ricoh-like protective layer, hardness and abrasion resistance, the best soil surface layer of hardened wear-resistant degree, the formation of a long-lasting class letter large drumming, peeling, micro-cracking Jian and other characteristics of the concrete Road pass, so that the mixed soil to "breathe", thus avoiding up to the Moh's hardness of 8-9 degrees.
Effective sealing bright non-slip
Hardener will seal the concrete into a solid entity. After treatment, the grass-roots level of the ground will appear this person's light.
It penetrates into the inner layer of the concrete and seals it from the inside, making it shiny and non-slip. And by the use of time delay, the surface of the
Soil capillaries, mixed soil will become firm and dense, effective appearance will be better, in fact, the user is unconsciously
In fact, the user unconsciously inhibits external pollutants from entering into the soil mixing, from the resistance to light hunting work, so that the cleaning work becomes simpler.
This makes cleaning easier.
Resistant to chemical attack, durable and maintenance-free
The chemical structure of the hair gel and the unique characteristics of the material make it durable and maintenance-free.
After use, the surface of the soil mix becomes dense and smooth, and the flooring material that does not require repeated maintenance can be used for a long time, and after completion, it can be used for a long time.
Effectively inhibit and resist the entry of chemicals into the Tifa soil next process caused by other construction dirt cleaning is particularly easy to clear
The layer prevents chemicals from eroding and damaging the concrete. The washing, so that the finished floor of the finished product protection is exclusively simple.
Thorough dust control
The dust generated by the weathering of mixed hair soil will stay in the space of the goods colourless, odourless, no organic solvent volatiles, in line with the requirements of when
The concept of environmental protection, health and safety of today's penetrating sealing and hardening materials can be easily changed.
The batch junction with the source of the soil will become indispensable to the liquor of the soil.
Part of the cut. The chemical can effectively prevent the concrete surface from being damaged, and it is easy to work with and non-toxic. It is odourless and can be produced at the same time.
It protects the equipment from dust, protects the goods, and can be quickly put back into use while the work is being done.
Shelves are not infested with dust particles.
Good ageing resistance Strong penetration
No yellowing, resistant to whitening phenomena. General flooring materials Excellent penetration, can be involved in 5-8mm concrete
After a long time of use, the colour will produce obvious changes, and the inner layer, effectively sealing the concrete pores from the inside, mixing
and whitening phenomenon caused by wear and tear. 3 soil can be more solid and durable.
