Product aliases
- Alkyd paint, alkyd top coat, alkyd coating, alkyd anti-corrosion coating, alkyd anti-corrosion top coat, alkyd magnetic top coat.
Basic parameters
| English name of product | Alkyd paint |
| Chinese name of product | Alkyd topcoat |
| Dangerous Goods No. | 33646 |
| UN No. | 1263 |
| Organic solvent volatility | 64 standard metre³. |
| Brand | Jinhui Paint |
| Model No. | C52-5-2 |
| Colour | Colourful |
| Mixing ratio | Single component |
| Appearance | Smooth surface |
Product composition
- Alkyd topcoat is a topcoat composed of alkyd resin, additives, No.200 solvent gasoline and mixed solvents, catalytic agent and so on.
Surface Treatment
1. Paint film anti-chalking, good protection performance, good light and colour retention, bright colour, good durability.
2. Good adhesion to metal, wood, and have a certain degree of water resistance, salt water resistance.
3. The paint film is tough, good closure, excellent anti-rust performance, can withstand temperature impact.
4. It has good weather resistance, gloss and hardness.
5. High pigment content, good sanding performance.
6. Strong adhesion, good mechanical properties.
7. Good construction performance.
8. Strong filling ability.
Technical parameters: GB/T 25251-2010
- Status in the container: no hard lumps after stirring and mixing, in a homogeneous state
- Fineness: ≤40um (standard index: GB/T6753.1-2007)
- Non-volatile matter content: ≥50% (standard index: GB/T1725-2007)
- Water resistance: 8h without cracking, blistering or peeling (Standard index: GB/T9274-88)
- Salt water resistance: 3% NaCl, 48h without cracking, blistering and peeling (Standard index: GB/T9274-88)
- Drying time: surface drying ≤ 8h, solid drying ≤ 24h (standard index: GB/T1728-79)
Surface treatment
- Steel surface sandblasting treatment to Sa2.5 grade, surface roughness 30um-75um.
- De-rusting of electric tools to St3 grade.
Usage
- Applicable to steel surface, mechanical surface, pipeline surface, equipment surface, indoor and outdoor metal surface and wood surface protection and decoration, is a general-purpose paint, widely used in construction, machinery, vehicles and various decorative industries.
Paint construction
- After opening the barrel, it must be stirred evenly, left to stand, and after maturing for 30min, add appropriate amount of thinner and adjust to the construction viscosity.
- Diluent: special diluent for alkyd series.
- Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Roller coating: Dilution amount is 5-10% (in terms of paint weight ratio).
Precautions
- In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
- This product should be used by professional painting operators according to the instructions on the product package or this manual.
- All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
- If in doubt as to whether or not to use this product, please contact our technical service department for details.
Packaging
- 25kg drum
Transport and storage
- The product should be stored in a cool and ventilated place, prevented from direct sunlight, and isolated from sources of ignition, away from heat sources in the warehouse.
- When transporting the product, it should be prevented from rain, sunlight exposure, avoid collision, and should comply with the relevant regulations of the traffic department.
Safety Protection
- The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
- Smoke and fire are strictly prohibited at the construction site.
Customer's Frequently Asked Questions
● Is it easy to paint white and light-coloured topcoat after applying Iron Red anti-rust?
A: No, it is not easy, you need to apply two more coats of topcoat.
● Can the topcoat be applied on plastic, aluminium and galvanised surfaces?
A: Conventional alkyd enamels cannot be applied to the above surfaces.
