Product aliases
- Alkyd antirust paint, alkyd iron red anticorrosive primer, alkyd iron red paint, alkyd grey primer, alkyd anticorrosive primer.
Basic parameters
| English name of product | Alkyd paint iron red |
| Chinese name of product | Alkyd iron red paint |
| Dangerous Goods No. | 33646 |
| UN No. | 1263 |
| Organic solvent volatility | 64 standard metre³. |
| Brand | Jinhui Paint |
| Model No. | C52-1-3 |
| Colour | Iron red, grey |
| Mixing ratio | One-component |
| Appearance | Smooth surface |
Product composition
- Alkyd primer is composed of alkyd resin, iron oxide red, antirust pigmented filler, additives, No.200 solvent gasoline and mixed solvent, catalytic agent and so on.
Properties
- Paint film anti-chalking, good protection performance, good light and colour retention, bright colour, good durability.
- Good adhesion, good mechanical properties.
- Good filling ability.
- High pigment content, good sanding performance.
- Poor in solvent resistance (petrol, alcohol, etc.), acid and alkali resistance, chemical resistance, slow drying speed.
- Good matching performance, good combination with alkyd top coat.
- Tough film, good closure, excellent anti-rust performance, can withstand the impact of temperature difference.
- Good construction performance.
Usage
- Suitable for steel surfaces, machinery surfaces, pipeline surfaces, equipment surfaces, wood surfaces; alkyd primer can be used as the primer of alkyd magnetic paint with high decorative requirements, suitable for wood and steel surfaces; alkyd primer is only used as the matching primer of recommended alkyd paints and nitro paints, asphalt paints, phenolics paints, etc., and it can't be used as the matching antirust paint of two-component paints and strong solvent paints.
Technical parameters: GB/T 25251-2010
- Status in the container: no hard lumps after stirring and mixing, in a homogeneous state.
- Fineness: ≤50um (standard index: GB/T6753.1-2007)
- Salt water resistance: 3% NaCl, 24h without cracking, blistering or peeling (Standard index: GB/T9274-88)
- Drying time: surface drying ≤ 5h, solid drying ≤ 24h (standard index: GB/T1728-79)
Surface treatment
- Steel surface sandblasting to Sa2.5 grade, surface roughness 30um-75um.
- Electrical tools descaling to St3 grade.
Front course matching
- Directly painted on the surface of steel whose rust removal quality reaches Sa2.5 grade.
Back course matching
- Alkyd mica paint, alkyd paint.
Painting construction
- Thinners: special thinners for alkyd series.
- After opening the barrel, it must be stirred evenly, left to stand and mature for 30min, then add appropriate amount of thinner and adjust to the construction viscosity.
- Airless spraying: the dilution amount is 0-5% (in the ratio of the weight of the paint), the nozzle calibre is 0.4mm-0.5mm, and the spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Roller coating: Dilution amount is 5-10% (by paint weight ratio).
Packaging
- 25kg drum
Precautions
- In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
- This product should be used by professional painting operators according to the instructions on the product package or this manual.
- All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
- If in doubt as to whether this product should be used, please contact our technical service department for details.
Transport and storage
- The product should be stored in a cool and ventilated place, protected from direct sunlight, and isolated from sources of ignition and kept away from heat sources in a warehouse.
- Products should be protected from rain, sunlight and collision when transported, and should comply with the relevant regulations of the traffic department.
Safety Protection
- The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
- Smoking and fire are strictly prohibited at the construction site.
