Product aliases
- Alkyd paint, alkyd top coat, alkyd paint, alkyd anti-corrosion paint, alkyd anti-corrosion top coat, alkyd magnetic paint.
Basic parameters
| Product English name | Magnetic alkyd paint |
| Product Chinese name | Alkyd Magnetic Top Coat |
| Dangerous Goods No. | 33646 |
| UN No. | 1263 |
| Organic solvent volatility | 64 standard metre³. |
| Brand | Jinhui Paint |
| Model No. | C52-5-6 |
| Colour | Colourful |
| Mixing ratio | Single component |
| Appearance | Smooth surface |
Product composition
- Alkyd magnetic top coat is a magnetic top coat composed of alkyd resin, additives, No.200 solvent gasoline and mixed solvents, and catalytic agent.
Technical parameters: GB/T 25251-2010
- Status in the container: no hard lumps after stirring and mixing, in a homogeneous state
- Fineness: ≤40um (standard index: GB/T6753.1-2007)
- Non-volatile matter content: ≥50% (Standard index: GB/T1725-2007)
- Water resistance: 8h without cracking, blistering or peeling (Standard index: GB/T9274-88)
- Salt water resistance: 3% NaCl, 48h without cracking, blistering and peeling (Standard index: GB/T9274-88)
- Drying time: surface drying ≤ 8h, solid drying ≤ 24h (standard index: GB/T1728-79)
Surface treatment
- Steel surface sandblasting treatment to Sa2.5 grade, surface roughness 30um-75um.
- Electrical tools descaling to St3 grade.
Front course matching
- Alkyd primer, alkyd intermediate paint.
Usage
- Suitable for steel surface, machinery surface, pipeline surface, equipment surface, wood surface; suitable for indoor and outdoor metal surface and wood surface protection and decoration, is a general-purpose paint, widely used in construction, machinery, vehicles and various decorative industries.
Painting construction
- After opening the barrel, it must be stirred evenly, left to stand, and after maturing for 30min, add appropriate amount of thinner and adjust to the construction viscosity.
- Diluent: special diluent for alkyd series.
- Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Roller coating: Dilution amount is 5-10% (in terms of paint weight ratio).
- Alkyd primer, alkyd intermediate paint.
Precautions
- In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
- This product should be used by professional painting operators according to the instructions on the product package or this manual.
- All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
- If in doubt as to whether this product should be used, please contact our technical service department for details.
- Alkyd primer, alkyd intermediate paint.
Transport Storage
- The product should be stored in a cool and ventilated place, protected from direct sunlight, and isolated from sources of ignition and kept away from heat sources in a warehouse.
- Products should be protected from rain, sunlight and collision when transported, and should comply with the relevant regulations of the traffic department.
Safety Protection
- The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
- Smoke and fire are strictly prohibited at the construction site.
Customer's Frequently Asked Questions
● Is it easy to paint white and light-coloured topcoat after applying Iron Red anti-rust?
A: No, it is not easy, you need to apply two more coats of topcoat.
● Can the topcoat be applied on plastic, aluminium and galvanised surfaces?
A: Conventional alkyd enamels cannot be applied to the above surfaces.
