Product aliases
- Alkyd paint, alkyd top coat, alkyd magnetic paint , alkyd anticorrosive coating, alkyd anticorrosive top coat, alkyd magnetic top coat.
Basic parameters
| Product English name | Alkyd coatings |
| Product Chinese name | Alkyd coatings |
| Dangerous Goods No. | 33646 |
| UN No. | 1263 |
| Organic solvent volatility | 64 standard metre³. |
| Brand | Jinhui Coatings |
| Model No. | C52-5-3 |
| Colour | Colourful |
| Mixing Ratio | One-component |
| Appearance | Smooth surface |
Product composition
- Alkyd coating is composed of alkyd resin, additives, No.200 solvent gasoline and mixed solvents, drying agent and so on.
Technical parameters: GB/T 25251-2010
- Status in the container: no hard lumps after stirring and mixing, in a uniform state.
- Fineness: ≤40um (standard index: GB/T6753.1-2007)
- Non-volatile matter content: ≥50% (Standard index: GB/T1725-2007)
- Water resistance: 8h without cracking, blistering or peeling (Standard index: GB/T9274-88)
- Salt water resistance: 3% NaCl, 48h without cracking, blistering and peeling (Standard index: GB/T9274-88)
- Drying time: surface drying ≤ 8h, solid drying ≤ 24h (standard index: GB/T1728-79)
Surface Treatment
- Steel surface sandblasting treatment to Sa2.5 grade, surface roughness 30um-75um.
- Electrical tools descaling to St3 grade.
Front course matching
- Alkyd primer, alkyd mica intermediate paint.
Construction parameters
| Recommended film thickness | 60-80um |
| Recommended number of coats | 2~3 coats |
| Storage temperature | -10~40℃. |
| Construction temperature | 5~40℃ |
| Trial period | 6h |
| Construction method | Brushing, air spraying, rolling can be used. |
| Theoretical dosage | about 120g/m² (based on 35um dry film, excluding loss). |
| Coating interval
|
Substrate temperature ℃ 5-10 15-20 25-30 |
| Shorter interval h 48 24 12 | |
| The longer interval should not exceed 7 days. | |
| The substrate temperature must be more than 3℃ above the dew point. When the substrate temperature is lower than 5℃, the paint film will not be cured and is not suitable for construction. | |
Paint construction
- After opening the barrel, it must be stirred evenly, left to stand and mature for 30min, then add appropriate amount of thinner and adjust to the construction viscosity.
- Diluent: special diluent for alkyd series.
- Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Roller coating: Dilution amount is 5-10% (by paint weight ratio).
Usage
- Suitable for steel surface, machinery surface, pipeline surface, equipment surface, wood surface; also suitable for indoor and outdoor metal surface and wood surface protection and decoration, is a general-purpose paint, widely used in construction, machinery, vehicles and various decorative industries.
Note
Dry spraying is likely to occur during the hot season:
- In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
- This product should be used by professional painting operators according to the instructions on the product package or this manual.
- All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
- If in doubt as to whether or not to use this product, please contact our technical service department for details.
Packaging
- 25kg drum
Transport and storage
- The product should be stored in a cool and ventilated place, prevented from direct sunlight, and isolated from sources of ignition, away from heat sources in the warehouse.
- When transporting the product, it should be prevented from rain, sunlight exposure, avoid collision, and should comply with the relevant regulations of the traffic department.
Safety Protection
- The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
- Smoke and fire are strictly prohibited at the construction site.
Customer's Frequently Asked Questions
● Is it easy to paint white and light-coloured topcoats after applying Iron Red Anti-Rust?
A: No, it is not easy, you need to apply two more coats of topcoat.
● Can the topcoat be painted on plastic, aluminium and galvanised surfaces?
A: Conventional alkyd enamels cannot be applied to the above surfaces.
