page_head_banner

Products

Epoxy Paint Epoxy Coal Tar Paint Antiseptic Coating

Short Description:

Epoxy coal tar paint is based on traditional Epoxy coal tar coating, adding long-lived chloro-sulfonated polyethylene rubber, mica iron oxide, other corrosion resistant fillers, special additives and active solvents, and prepared by advanced technology. This epoxy coating has the characteristics of large adhesion, chemical medium erosion resistance, water resistance, microbial resistance and plant root resistance of asphalt, corrosion resistance, insulation, water resistance, chemical resistance, good adhesion, flexibility and other characteristics. The primer is type A, the middle paint is type B, and the top paint is type C.


Product Detail

Product Tags

Product Description

Epoxy coal tar paint primer and top paint are made of epoxy resin and coal asphalt as the main film forming material, adding a variety of anti-rust pigments, insulating fillers, toughening agents, leveling agents, diluents, anti-settling agents, etc. Component B is modified amine curing agent or curing agent as the main material, adding makeup filler.

Main features

  1. Interpenetration network anticorrosion layer. By modifying traditional Epoxy coal tar paint with excellent anticorrosive properties, chlorosulfonated polyethylene rubber was cured to form an interpenetrating network anticorrosive coating between epoxy resin chain and rubber chain. It has low water absorption, good water resistance, strong microbial erosion resistance and high permeability resistance.

  2. Excellent anti-corrosion comprehensive performance. Due to the use of excellent anticorrosive properties of rubber modification, the coating's physical and mechanical properties, electrical insulation properties, wear resistance, stray current resistance, heat resistance, temperature resistance and other properties are better.

  3. A film thickness. The solvent content is low, the film is thick at one time, and the construction method is the same as that of traditional Epoxy coal tar paint.

Product Specifications

Color Product Form MOQ Size Volume /(M/L/S size) Weight/ can OEM/ODM Packing size/ paper carton Delivery Date
Series color/ OEM Liquid 500kg M cans:
Height: 190mm, Diameter: 158mm, Perimeter: 500mm,(0.28x 0.5x 0.195)
Square tank:
Height: 256mm, Length: 169mm, Width: 106mm,(0.28x 0.514x  0.26)
L can:
Height: 370mm, Diameter: 282mm, Perimeter: 853mm,(0.38x 0.853x 0.39)
M cans: 0.0273 cubic meters
Square tank:
0.0374 cubic meters
L can:
0.1264 cubic meters
3.5kg/ 20kg customized accept 355*355*210 Stocked item:
3~7 working-days
Customized item:
7~20 working days

Main uses

  1. Epoxy coal tar paint is suitable for steel structures permanently or partially submerged underwater, chemical plants, sewage treatment ponds, buried pipelines and steel storage tanks of oil refineries; Buried cement structure, gas cabinet inner wall, bottom plate, automobile chassis, cement products, coal mine support, mine underground facilities and Marine wharf facilities, wood products, underwater structures, wharf steel bars, heating pipelines, water supply pipelines, gas supply pipelines, cooling water, oil pipelines, etc.
  2. Epoxy coal tar anticorrosive paint is mainly used for buried or underwater steel oil transmission, gas transmission, water supply, heating pipeline outer wall anticorrosion, but also suitable for all kinds of steel structures, wharves, ships, sluice, gas storage tanks, oil refining and chemical plant equipment anticorrosion and concrete pipe, sewage tank, roof waterproof layer, toilet, basement and other concrete structure waterproof and anti-leakage.
Epoxy-paint-1
Epoxy-paint-3
Epoxy-paint-6
Epoxy-paint-5
Epoxy-paint-2
Epoxy-paint-4

Preparation method

Stir the paint thoroughly until there is no sediment at the bottom of the bucket, and add special curing agent according to the paint: curing agent 10:1(weight ratio) under the stirred state and stir evenly. The prepared paint is placed for 10 to 15 minutes before use.

Surface treatment requirements

Steel structure, substrate treatment requirements to reach the rust removal standard Sa2.5, or manual rust removal; Chemical rust removal can also be used, requiring no oil, no rust, no foreign matter, dry and clean, the surface of the steel matrix after rust removal must be coated with primer within 4 hours.

About Us

Our company has always been adhering to the "'science and technology, quality first, honest and trustworthy , strictimplementation of ls0900l:.2000 international quality management system.Our rigorous managementtechnologicdinnovation, quality service cast the quality of products, won the recognition of the majority of users.As a professionastandard and strong Chinese factory, we can provide samples for customers who want to buy, if you need acrylicroad marking paint, please contact us.


  • Previous:
  • Next: