China Factory Automotive Paint Supplies Two Component One Component Oil Based Water Based Clear Coat High Standard Clear Coat Car Paint 2K 1K
Product Description
Advantages:
1. Provides superior protection:
The clear coat is made from a mixture of resin and solvent, with no added pigments, ensuring that the item being coated retains its original appearance and texture. Its abrasion resistance and hardness are far superior to other types of protective clear coatings, providing a strong barrier for the outer layer of the car, effectively resisting scratches, corrosion and ultraviolet radiation, thus extending the life of the car.
2. Enhancement of aesthetic appearance:
Varnish gives a smoother and more delicate touch to the surface of the car and significantly improves the gloss level, giving the car a more attractive appearance. It can also repair minor damages caused by sunlight, rain, scratches, etc., making the vehicle look brand new.
3. Convenient for daily cleaning:
Clearcoat can effectively block the adhesion of dirt and dust, reduce scratches left behind when washing the car, and bring great convenience for daily cleaning. At the same time, its smooth surface is easier to keep clean, reducing the frequency and difficulty of cleaning.
4. Enhanced corrosion resistance:
The varnish layer can effectively isolate air and moisture, preventing the metal body from direct contact with corrosive substances, such as acid rain, salt spray, etc., thus greatly enhancing the car’s corrosion resistance and protecting the body from damage.
5. Increase vehicle value:
For the second-hand car market, vehicles with good appearance tend to get a higher appraisal value. The appearance of a car after varnish treatment is almost the same as a new car, which is an advantage that cannot be ignored by car owners who wish to sell or replace their vehicles.
In summary, automotive clearcoats play a pivotal role in the field of automotive protection and detailing due to their multiple advantages such as superior protection, aesthetics, ease of cleaning, corrosion resistance, and enhancement of vehicle value.
Usage dosage:
Blending ratio:
Domestic Varnish: 2 parts paint, 1 part hardener, 0 to 0.2 parts (or 0.2 to 0.5 parts) thinner is usually recommended for blending. When spraying, it is usually necessary to spray twice, the first time lightly and the second time as needed for compaction.
Precautions for use:
The amount of thinner used needs to be strictly controlled, as an excess may result in the paint film being less glossy and appearing less full.
The amount of hardener added must also be accurate, too much or too little will affect the quality of the film, such as causing the film not dry, not hard enough or surface flaking, cracking and other problems.
Before spraying, it should be ensured that the surface of the car is clean and dust-free so as not to affect the spraying effect.
Drying and hardening:
After spraying, the vehicle usually needs to wait for 24 hours before it can be put on the road to ensure that the paintwork is sufficiently dry and hardened. Under the standard operation process, the paint surface can be gently touched after 2 hours, and its hardness can reach about 80% after 24 hours.
Second, spraying method
The first spraying:
To fog spray-based, can not be sprayed too thick, to the extent that slightly can appear glossy spraying. The running speed of the spray gun can be slightly faster, pay attention to maintain uniformity.
Second spraying:
In the first spraying after drying. At this time you can slightly increase the consistency of the paint, but must be evenly sprayed to achieve the best levelling effect and brightness.
Spray with pressure at 1/3 of the previous coat or compact as needed.
Other Precautions:
Air pressure should be kept stable when spraying, it is recommended to control it at 6-8 units and adjust the size of the gun fan according to personal habits5.
In colder weather, wait for the paint to dry after spraying before applying the second coat of paint5.
In summary, the usage dosage of automotive varnish needs to be mixed and sprayed according to the specific varnish type, brand and spraying requirements. During the spraying process, the amount of thinner and hardener used should be strictly controlled, and attention should be paid to the spraying method and drying and hardening time in order to obtain the best spraying results.
