Best Quality Automobile Paint Auto Base 2K Two Component Car Paint Auto Coating Violet Blue Bright Mercedes Car Painting Art Sichuan AB component 1L
Product Description
Advantages:
Strong durability: two-component automotive colour paint has excellent durability, its hardness, abrasion resistance, chemical substance corrosion resistance and weather resistance and other indicators are much higher than the traditional one-component paint. After use, the surface finish is high, the colour is full, and the effect is more durable12.
Good environmental protection: two-component automotive paint in the preparation process does not contain harmful substances volatile chemical substances, does not produce odour and adverse effects on human health, in line with the requirements of environmental protection, to avoid direct contact between workers and toxic materials12.
Bright colour: After using two-component automotive colour paint, the surface finish is high, the colour is bright and full, suitable for all kinds of metal and plastic surfaces, with excellent adhesion3.
Economy: The production process of two-component automotive colour paint is more economical, which can reduce the cost of paint, labour and energy, and improve the profit of the product. After spraying, it can be baked with low temperature and short time, and the energy of drying oven is greatly saved, which reduces the economic pressure of environmental protection2.
Wide range of application: two-component automotive colour paint is suitable for motorbikes, automobiles, household appliances, mechanical metal and ABS, PS, PC, HIPS and other metal, plastic surfaces, a wide range of applications
Usage:
Substrate treatment: firstly, the old paint layer or substrate needs to be cleaned, which can be done using tools such as sandpaper, dusting cloths, etc., along with a degreaser. After ensuring that the substrate is clean and dry, start mixing the colour paint, hardener and thinner and stir well1.
Mixing the colour paint: Mix the colour paint, hardener and thinner in the correct proportions. Usually, two-component car colour paints need to be mixed with a special hardener. If the hardener is not added or the amount added is incorrect, it may lead to problems such as slow drying of the paint, non-hardening, poor hardness and poor weather resistance1.
Construction Spraying: When spraying is carried out, it is usually necessary to spray 2-3 coats, with an interval of 5-10 minutes between each coat. The first thin spraying, and then gradually thicken the spraying, after spraying should achieve a smooth mirror sense1.
Drying and curing: After spraying, the paint needs some time to dry and cure. Usually it takes about 4 hours to dry itself at 25°C. If it needs to dry faster, it can be baked at 60-70°C, and can be dried and sanded in about 25 minutes2.
Caution:
Mixed paint should be used as soon as possible to avoid curing caused by long time leaving.
When spraying, pay attention to the time between layers to ensure that each layer dries before the next layer is sprayed.
After spraying, make sure the surface of the paint is smooth and mirror-like to avoid uneven drying or poor results
Technical Parameters:
Film appearance and colour: the film is flat and smooth, and the colour is in accordance with the standard sample 12.
Gloss: 60° angle gloss, gloss ≥ 90%, matte between 20 and 80% 12.
Hardness: pencil hardness ≥ HB1.
Adhesion: scratch method test, level ≤11.
Cupping test: ≥4mm1.
Bending test: ≤2mm1.
Water resistance: 240 hours without change1.
Gasoline resistance: 24 hours without change1.
Weather resistance: Artificial accelerated aging 800 hours, loss of light ≤ 1, chalking ≤ 11.
